Filter Driers - ABR Components

Go to content
FILTER DRIERS

The function of the Filter Drier is to provide filtration for protection of efficiency and condition of the refrigeration systems.
The most basic task of a Filter Drier is to remove moisture from system and to prevent and clean acidic formation. Using the special moisture and acid removal agents, the moisture and acid is taken from the system providing protection. The contaminations caused by, during installation, welding, worn units’ (compressor, pipe etc.) particles and any harmful and/or abrasive impurities, are also filtered.
The best of the benefits of using the Filter Drier is to lower the risk of system failure and increase the lifespan of the system.
Molecular Sieve differs from other adsorbents. The first two graphics below show the comparisons and basic properties of Molecular Sieve and the last graphic shows the properties of Activated Alumina. The first graphic illustrates the water adsorption of Molecular Sieve comparing to other adsorbents at the same temperature and low relative humidity. The second graphic shows the decrease in their adsorption capacity is significantly smaller than the others with the raising temperature. The third graphic illustrates the Activated Alumina’s acid removal capacity against Molecular Sieve.
two filter driers immage abr
chart water adsorption filter drier
chart water adsorption filter drier 2
chart filter drier abr
filter driers components abr
FILTER DRIER SERIES 45 BAR
ESSD / ESSDS Filter Drier Series are hermetic Filter Drier in compacted bead style for use on liquid line.
Moisture removal formula, is prepared as %80 Molecular Sieve and %20 Activated Alumina targeting maximum moisture and acid removal from the system.
For CFC and HCFC refrigerants with mineral and alkyl benzene oils, ESSD / ESSDS Series are recommended. At the same time they are compatible with HFC refrigerants and blends.

ESSDM / ESSDMS Filter Drier Series are hermetic Filter Drier in compacted bead style for use on liquid line.
Moisture removal formula, is prepared as %100 Molecular Sieve targeting maximum moisture removal and acid formation prevention.
For HFC (incl. R-22) with POE and PAG oils and additives ESSDM / ESSDMS Series are recommended.

ESSDTM / ESSDTMS Filter Drier Series are hermetic Filter Drier in compacted solid core for use on liquid line.
Moisture removal formula, is prepared as %100 Molecular Sieve targeting maximum moisture removal and acid formation prevention.
For HFC (incl. R-22) with POE and PAG oils and additives ESSDTM / ESSDTMS Series are recommended.

Abr filter driers
FILTER DRIER SERIES 140 BAR

ESSDC / ESSDCS / ESSDMC / ESSDMCS Series are hermetic Filter Drier in compacted bead style for use on liquid line, are designed for use with CO2 (R-744) in “Subcritical Zone”.
Moisture removal formula, is prepared as %100 Molecular Sieve in ESSDMC, ESSDMCS, ESSDTMC and ESSDTMCS Series, %80 Molecular Sieve and %20 Activated Alumina in ESSDC and ESSDCS Series targeting maximum moisture removal and acid formation prevention.

ESSDMC, ESSDMCS, ESSDTMC and ESSDTMCS Series are compatible with POE oils and additives, are hermetic Filter Drier in compacted solid core for use on liquid line, 90 and 140 are designed for use with CO2 (R744) with 90 and 140 bar applications in "transcritical zone". Moisture remove formula is prepared as 100% Molecular sieve targeting maximum moisture removal and acid formation prevention.



Abr  filter drier
REPLACEABLE CORE FILTER DRIER SHELL SERIES
ESSRCH48 Series Replaceable Core Filter Drier Shells are designed for large industrial / commercial refrigeration systems. It defers from Filter Driers by having high filtration surface area and replaceable core.
At the hardest conditions, easily replaceable internal structure and apparatus, ESSRCH48 will serve you well. Having plastic internal structure material, during the servicing stage, the unwanted substance can not able to return to the system.
Special design internal filtering system, even at the higher connection dimensions, the pressure drop will be at minimum keeping the filtration capability.
ESSRCH48 can be chosen to have maximum of 4 cores. Even at the muptile core usage, there will be no different pressure drops having the parallel refrigerant flow condition.
ESSRCH48 has high working pressure capability to serve best in R-410A and R-744 (Subcritical).
Abr internal  filter drier
DISCHARGE MUFFLER SERIES

ESSMS Series Discharge Mufflers are used for regulation of the vibrations and noises which are produced by the compressor

black filter drier ABR
ODS Filter Drier : Filter driers in compact style from 6 mm (1/4") to 22 mm (7/8") for all types of Freon's up to 45 bar
SAE Filter Drier : Filter driers in compact style from 1/4" to 3/4" for all types of Freon's up to 45 bar
ODS BURN OUT Filter Drier : Filter driers in compact style from 10 mm (3/8") to 42 mm (1.5/8") for all types of Freon's up to 45 bar
ODS Filter Drier : Filter driers in compact style from 6 mm (1/4") to 16 mm (5/8") for R744 up to 70 bar
SAE Filter Drier : Filter driers in compact style from 1/4" to 5/8" for R744 up to 70 bar
ODS Filter Drier : Filter driers in compact style from 6 mm (1/4") to 16 mm (5/8") for R744  up to 90 bar
ODS Filter Drier : Filter driers in compact style from 6 mm (1/4") to 16 mm (5/8") for R744  up to 140 bar
ODS BURN OUT Filter Drier : Filter driers in compact style from 10 mm (3/8") to 16 mm (5/8") for R744 up to 60 bar
Solid Core Filter Cartridge : Filter driers with cartridges (1 to 4 cores) from 10 mm (3/8")  to 54 mm (2.1/8") for all tupes of Freon's up to 45 bar
Y FILTER: Mechanic Y strainer for all types of Freon's up to 45 bar.
Y FILTER: Mechanic Y strainer for R744 up to 120 bar.
Copper Mechanical Strainer: Mechanic strainer for all types of Freon's up to 45 bar. CUSTOMIZABLE COMPONENT
Powered by webprojm.com
Logo ABR Components
ABR Components, trade consulting for industrial refrigeration, HVAC, Freon and R744 low and high pressure applications
Privacy Policy
Cookie Policy
Contact Us
Wherehouse Address:
Via L.Savio 1 - 33080 Roveredo in Piano (PN)
VAT IT01688460938 |  +39 345 4605931 (Mob.)
Tel. 0434 312483
info@abrcomponents.eu
Legal Address
Pi.le Ellero dei mille, 2 - 33170 Pordenone

Back to content